家电维修班,手机维修班,电脑维修班,电工班,焊工班,液晶电视维修班,电动工具维修班、电动车摩托车维修班、网络营销培训、网站设计培训、淘宝培训---全国招生 家电维修班,手机维修班,电脑维修班,电工班,焊工班,液晶电视维修班,电动工具维修班、电动车摩托车维修班、网络营销培训、网站设计培训、淘宝培训---全国招生
当前位置: 电脑硬件维修培训网网络技术Introduction to WAN Technologies
文章内容

Introduction to WAN Technologies

作者:佚名  来源:本站整理  发布时间:2012-01-18 23:26:12

Introduction to WAN Technologies
What Is a WAN?
Point-to-Point Links
Circuit Switching
Packet Switching
WAN Virtual Circuits
WAN Dialup Services
WAN Devices

WAN Switch
Access Server
Modem
CSU/DSU
ISDN Terminal Adapter

Review Questions
For More Information

Chapter Goals

  • Become familiar with WAN terminology.
  • Learn about different types of WAN connections.
  • Become familiar with different types of WAN equipment.


Introduction to WAN Technologies

This chapter introduces the various protocols and technologies used in wide-area network (WAN) environments. Topics summarized here include point-to-point links, circuit switching, packet switching, virtual circuits, dialup services, and WAN devices. Chapters in Part III, "WAN Protocols," address specific technologies in more detail.

What Is a WAN?

A WAN is a data communications network that covers a relatively broad geographic area and that often uses transmission facilities provided by common carriers, such as telephone companies. WAN technologies generally function at the lower three layers of the OSI reference model: the physical layer, the data link layer, and the network layer. Figure 3-1 illustrates the relationship between the common WAN technologies and the OSI model.


Figure 3-1: WAN Technologies Operate at the Lowest Levels of the OSI Model

Point-to-Point Links

A point-to-point link provides a single, pre-established WAN communications path from the customer premises through a carrier network, such as a telephone company, to a remote network. Point-to-point lines are usually leased from a carrier and thus are often called leased lines. For a point-to-point line, the carrier allocates pairs of wire and facility hardware to your line only. These circuits are generally priced based on bandwidth required and distance between the two connected points. Point-to-point links are generally more expensive than shared services such as Frame Relay. Figure 3-2 illustrates a typical point-to-point link through a WAN.


Figure 3-2: A Typical Point-to-Point Link Operates Through a WAN to a Remote Network

Circuit Switching

Switched circuits allow data connections that can be initiated when needed and terminated when communication is complete. This works much like a normal telephone line works for voice communication. Integrated Services Digital Network (ISDN) is a good example of circuit switching. When a router has data for a remote site, the switched circuit is initiated with the circuit number of the remote network. In the case of ISDN circuits, the device actually places a call to the telephone number of the remote ISDN circuit. When the
two networks are connected and authenticated, they can transfer data. When the data transmission is complete, the call can be terminated. Figure 3-3 illustrates an example of this type of circuit.


Figure 3-3: A Circuit-Switched WAN Undergoes a Process Similar to That Used for a Telephone Call

Packet Switching

Packet switching is a WAN technology in which users share common carrier resources. Because this allows the carrier to make more efficient use of its infrastructure, the cost to the customer is generally much better than with point-to-point lines. In a packet switching setup, networks have connections into the carrier's network, and many customers share the carrier's network. The carrier can then create virtual circuits between customers' sites by which packets of data are delivered from one to the other through the network. The section of the carrier's network that is shared is often referred to as a cloud.

Some examples of packet-switching networks include Asynchronous Transfer Mode (ATM), Frame Relay, Switched Multimegabit Data Services (SMDS), and X.25. Figure
3-4 shows an example packet-switched circuit.

The virtual connections between customer sites are often referred to as a virtual circuit.


Figure 3-4: Packet Switching Transfers Packets Across a Carrier Network
 

本新闻共3页,当前在第1页  1  2  3  

在线报名
友情链接